Vanadis®8 is a high-value tool steel, that undergoes gas atomization and hot isostatic pressing during production , resulting in costly waste. Repurposing this waste material through powder metallurgy (PM) offers a cost-effective solution. This study explores the PM process applied to Vanadis®8 steel scraps, involving high energy ball milling, uniaxial pressing, and sintering. The final product and the as-received steel underwent heat treatments, including quenching and tempering. Microstructural evaluation employed X-ray diffraction and scanning electron microscopy, while physical evaluation entailed Archimedes density measurements. Mechanical analysis was carried out through microhardness and compression strength tests. Results revealed that optimal milling conditions were achieved at 30 hours with 400 rpm (s-1). Vanadis®8 steel produced through PM attained 85% densification compared to the as-received material (6.31 g/cm3). MC-type carbides were present in all evaluated conditions. Heat treatments improved mechanical values for all conditions, suggesting that PM-produced Vanadis®8 steel, subjected to quenching and tempering, presents a viable reuse option.

Abstract In this paper, Fe-15at.%Nb alloys were produced from high purity Fe (min. 99.8%) and Nb (min. 99.8%) powders via a mechanical alloying process. The effects of different Process Control Agents (i.e., methanol, hexane, and stearic acid) were investigated with powder morphologies, particle size distribution, and phase formation, and were sampled after up to 80 milling hours at 350 rpm. The powder morphologies and particle sizes were evaluated using scanning electron microscopy and laser diffraction analysis, respectively, and phases were identified via X-ray powder diffractometry. The results demonstrate for all conditions that, in the early stages, there was significant particle agglomeration due to the ductile-ductile feature of Fe and Nb powders, and latter an amorphization trend up to 80 milling hours. Methanol was the most efficient Process Control Agent in terms of avoiding cold welding, reducing of agglomeration, particle size distribution, reducing contamination and crystallinity reduction rate.

The focus of this work was to determine microstructural features in commercial Ni-Cr alloys which could be used to identify indirectly the presence of beryllium. Thus, eight commercial alloys were characterized by chemical analysis, thermal analysis, X-ray diffraction (XRD), scanning electron microscopy - back-scattered electron images (SEM/BSE), energy-dispersive spectroscopy (EDS). The results indicate that the presence of beryllium can be inferred from microstructural analysis via XRD and SEM/BSE. The X-ray diffractograms of the beryllium-containing alloys showed clearly the existence of the NiBe intermetallic phase. SEM/BSE images of these alloys show a very characteristic eutectic microstructure which also indicates the presence of this element. These characteristics are not observed in the beryllium-free alloys.